[BS1209]- 30ml Tube Three Bond 3Bond 1209

Description

Formally product BS0SS :

1 new, unopened tube of DreiBond 1209 silicone sealant, with a new design since 1/2026! The quality issues with partially hardened tubes from early 2026 have been resolved!
– Contents 30ml
– recommended by BMW and corresponds to BMW part number 07 58 9 062 376
– no longer available from BMW and replaced by a different sealant

PRODUCT PROPERTIES:
Drei Bond 1209 is a high-performance silicone with excellent tensile strength and very high temperature resistance up to 200 °C and even up to 250 °C for short periods. The sealant exhibits excellent long-term temperature behavior and, in its cured state, good chemical resistance to common industrial media. APPLICATIONS Drei Bond 1209 is suitable for all surface and flange sealing applications in engine, transmission, axle, and drive systems with high compressive strength and is distinguished by its very high tear resistance and increased adhesion.
– Oil pan
– Oil pump, oil pump cover
– Oil filter housing
– Intermediate flange / sealing flange
– Water pump
– Intake manifold
– Cylinder head bearing
– Timing case / engine block
– Transmission housing
– Differential and transmission cover

PRODUCT ADVANTAGES:
– Immediate sealing upon flat application, so full load operation is possible after installation
– Permanently elastic long-term behavior even in high-temperature ranges – Very good aging resistance
– Normal disassembly is still possible
– Low inherent odor in the cured state

PHYSICAL PROPERTIES:
Appearance: pasty Color: colorless ​
Viscosity at 77 °F: > 500,000 cP (Brookfield)
Density at 77 °F: 8.93 lb/US gal (1.07 g/mL)
Skin formation time: approximately 15–20 minutes
Viscosity at 25 °C: > 500,000 mPa∙s (Brookfield) Density at 25 °C: 1.07 g/ml Skin formation time: ≈ 15 – 20 min