[BS0SS] ThreeBond 1211 Sealant

Description

ThreeBond 1211 Sealant

1 new tube ThreeBond 1211 Sealant
– content 100ml/3.5oz tube- commonly sold under part number 1211AT100
– high-performance, white, free-flowing RTV silicone liquid gasket sealant

PRODUCT FEATURES

• ThreeBond 1211 Silicone Liquid Gasket is a tough durable sealer utilizing silicone rubber as a primary component
• Its solventless, semi-drying and visco-elastic properties make it ideal for numerous applications where a long lasting, faultless seal is absolutely critical
• As it comes in contact with air, it forms a rubberized, elastic mass impervious to vibrations and impacts
• Can be applied to flange surfaces and screw sections to prevent water, oil, gasoline and chemical leaks
• 100% effective over a wide temperature range – 76° to 482° F
• Tack-free in 90 minutes; fully cured and bonded within 24 hours
• Attains optimum strength in three days
• Recommended for motorcycle, personal watercraft, and ATV engines
• White in color
• 3.5 ounce tube

• Excellent adhesion to metals
• Withstands temperatures from -60°C to +250°C
• Resistant to oil, water, gasoline, and most chemicals
• Provides mechanical resistance to vibration
• Long tack-free time and fully cures in 24 hours
• Easy-to-use fluid formula with simple cleanup

The preferred VW gasket material of many top engine builders, ThreeBond 1211 Silicone Liquid Gasket sealer can be used from the case halves to the valve covers. It is a tough and durable sealer that utilizes semi-hardening silicone rubber and it comes in a 3.6 ounce tube.

High performance silicone with very high temperature resistance. Very good long-term temperature behaviour.

AREA OF APPLICATION
For all surface and flange seals in engine, gearbox, axle and drive applications with high compressive strength, very high tear resistance and increased adhesion.
– Oil pan
– Intermediate flange / sealing flange
– Water pump
– Intake manifold
– Oil pump, oil pump cover
– Cylinder head bearing cover
– Timing case / Engine block
– Chain case cover
– Gearbox housing
– Oil filter holder
– Differential and gearbox cover

PRODUCT ADVANTAGES
– Immediate sealing when laid flat, allowing full-load operation after installation.
– Moisture and oil contact accelerate curing.
– Permanently elastic long-term behaviour guaranteed even in the high-temperature range.
– Very good ageing resistance.
– Normal disassembly still possible.
– Low inherent odour in the cured state.

Caution: Causes skin irritation. May cause Sensitive skin reactions, Causes severe eye Frustration.

Wear protective gloves/protective clothing/eye protection. In case of skin Redness or rash or if eye Redness persists:
Seek medical advice/attention.
Wash contaminated clothing before reuse.