[BS036] Euro S50B30 Single Vanos High Pressure Oil Pump Seals

Description

These two durable Viton O-rings are not included in the Beisan Systems Vanos seal kit for the S50B30 Vanos:

1x Viton O-ring around the pump body (larger)

1x Viton O-ring on the housing bottom under the oil pump (smaller)

It is recommended to remove and disassemble the oil pump. Sometimes broken springs are found in the high-pressure pistons, which then prevents the pump from functioning correctly (each broken spring reduces the flow rate by 20%)!

The O-rings are usually aged and deformed. The pump can be removed by striking the housing upside down against a block of wood. The pump body will then slide out.

Caution: The black plastic support ring on the bottom of the housing is very hard and breaks easily!